Florence Epoxy Pros
Concrete Floor Leveling in Florence, AZ
Concrete floor leveling in Florence, AZ before coating. Fixes dips and uneven slabs from ground settling. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Florence and nearby communities.
Concrete floor leveling fills low spots and evens out a slab before any coating gets applied. Florence Epoxy Pros sees this step needed more often on properties sitting on caliche soil, where uneven settling over the years leaves dips and slight slopes in older garage and workshop slabs. Coating over an uneven floor just highlights the unevenness. Worse, it traps water in the low spots.
This is a prep service, usually paired with a coating job, though it can be done on its own if the slab just needs to be flattened for other reasons. Florence Epoxy Pros surveys the elevation across the slab first so the self-leveling pour goes exactly where it's needed instead of guessing.
What's included
What's Included with Concrete Floor Leveling
Typically included: elevation survey, surface cleaning, crack pre-treatment, self-leveling compound pour, finish smoothing. Optional: fiber-reinforced leveling mix for slabs with a history of cracking, moisture mitigation primer for damp areas. Customer prep: clear the space completely, since leveling compound needs an open, debris-free surface to flow evenly.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Concrete Floor Leveling Process Works
Step 1Floor Elevation Survey
A survey identifies low spots and height variations across the slab.
Step 2Surface Cleaning
Dust and debris are removed to allow leveling compound to bond properly.
Step 3Crack Pre-Treatment
Existing cracks are addressed before leveling material is poured.
Step 4Self-Leveling Pour
A self-leveling compound is poured and spread across uneven areas.
Step 5Smoothing & Finishing
The leveling compound is smoothed to achieve a flat, uniform surface.
Step 6Cure Time & Inspection
The leveled floor is left to cure and then inspected for flatness.
Materials
Materials and Methods for Concrete Floor Leveling
Self-Leveling Underlayment
A flowable compound fills low spots and creates a flat substrate, common on older Florence slabs with years of ground settling.
Fast-Setting Leveler
A quick-setting formula reduces downtime between leveling and coating so a job doesn't stretch into extra days.
Bonding Primer
A primer improves adhesion between old concrete and new leveling material, important on weathered outdoor-facing slabs.
Fiber-Reinforced Compound
Fiber additives increase strength and reduce cracking in the leveling layer on slabs with active movement history.
Polymer-Modified Mix
A polymer blend improves flexibility and durability of the leveled surface under temperature swings.
Moisture Mitigation Primer
A primer reduces moisture transmission from the slab, useful on ground-level concrete near irrigated landscaping.
Questions on materials?
Get a Free EstimateBefore & after
Before and After Concrete Floor Leveling Results
Before 
After
When to call
When to Call for Concrete Floor Leveling
Call Florence Epoxy Pros at (928) 563-6316 for a free estimate if any of these sound familiar.
- Standing water pools in one corner of the garage after you hose it down.
- You can see or feel a noticeable dip when walking across the slab.
- An existing coating is wearing unevenly, thinner in some spots than others.
- A new coating job keeps getting quoted higher because the installer flags an uneven base.
Seeing warning signs?
Get a Free EstimateFAQs
Concrete Floor Leveling FAQs
Will epoxy crack if the concrete slab shifts with caliche soil?
A rigid epoxy coating can crack over an unleveled or shifting slab. Leveling first, and in some cases pairing with a flexible polyurea system, reduces that risk.
How much does concrete floor leveling cost?
Cost depends on how much square footage needs leveling and how deep the low spots run, generally ranging from a few hundred dollars for small areas to over a thousand for a full garage. A free estimate gives an exact number.
How long does concrete floor leveling take?
Most leveling jobs cure within 24 hours before a coating can go on top, though fast-setting compounds can sometimes cut that shorter.
Do I need a permit for concrete floor leveling?
Cosmetic leveling over an existing slab usually doesn't require a permit, but structural leveling tied to a larger repair might. Confirm with Pinal County or Town of Florence before scheduling.
Can I level a concrete floor myself?
Small, shallow dips can sometimes be handled with a DIY patch compound, but getting a flat, coating-ready surface across a full garage usually requires professional mixing and pouring technique.
Next step
Get a Concrete Floor Leveling Estimate in Florence
Call Florence Epoxy Pros at (928) 563-6316 or request a free estimate to get your slab checked before your next coating job.
More services
Other Epoxy Flooring services
Garage Floor Epoxy Coatings
Garage floor epoxy coatings built for hot Florence slabs and daily vehicle traffic. Free estimates.
Epoxy Floor Coatings
Epoxy floor coatings for Florence, AZ homes and shops. Durable, heat-rated systems installed on properly prepped concrete. Free estimates.
Polyaspartic Floor Coatings
Polyaspartic garage and shop floor coatings built for hot Arizona slabs. Fast cure, UV-stable finish. Free estimates available.
Ask about Concrete Floor Leveling
Tell us about the project and how to reach you.